The Exchange Server Role Requirement Calculator is your one stop calculation tool for Exchange 2013\2016 design. The tool covers design calculations for both the Mailbox and Client Access server role. Exchange 2013 reduced the number of roles from previous versions of Exchange by making the design and implementation as simple as possible and Exchange 2016 furthers that into a single role. The Server Role Requirement Calculator helps us to size virtually and it provides in-depth sizing of every component of the hardware like CPU, Memory, Network, Storage, Backup, servers, datacenter etc.
To give credit, this content was taken from my buddy Mike McGhem’s blog and I added some more color to it, but his content is right on.
To continue NPP training series here is my next topic: How does it work – CVM – Software Defined
If you missed other parts of my series, check out links below:
Part 1 – NPP Training series – Nutanix Terminology
Part 2 – NPP Training series – Nutanix Terminology
Cluster Architecture with Hyper-V
Data Structure on Nutanix with Hyper-V
I/O Path Overview
To give credit, most of the content was taken from Steve Poitras’s “Nutanix Bible” blog as his content is the most accurate and then I put a Hyper-V lean to it. Also, he just rocks…other than being a Sea Hawks Fan :).
As mentioned before (likely numerous times), the Nutanix platform is a software-based solution which ships as a bundled software + hardware appliance. The controller VM or what we call the Nutanix CVM is where the vast majority of the Nutanix software and logic sits and was designed from the beginning to be an extensible and pluggable architecture. A key benefit to being software-defined and not relying upon any hardware offloads or constructs is around extensibility. As with any product life-cycle, advancements and new features will always be introduced.
By not relying on any custom ASIC/FPGA or hardware capabilities, Nutanix can develop and deploy these new features through a simple software update. This means that the deployment of a new feature (e.g., deduplication) can be deployed by upgrading the current version of the Nutanix software. This also allows newer generation features to be deployed on legacy hardware models. For example, say you’re running a workload running an older version of Nutanix software on a prior generation hardware platform (e.g., 2400). The running software version doesn’t provide deduplication capabilities which your workload could benefit greatly from. To get these features, you perform a rolling upgrade of the Nutanix software version while the workload is running, and you now have deduplication. It’s really that easy.
Similar to features, the ability to create new “adapters” or interfaces into Distributed Storage Fabric is another key capability. When the product first shipped, it solely supported iSCSI for I/O from the hypervisor, this has now grown to include NFS and SMB for Hyper-V. In the future, there is the ability to create new adapters for various workloads and hypervisors (HDFS, etc.).
And again, all of this can be deployed via a software update. This is contrary to most legacy infrastructures, where a hardware upgrade or software purchase is normally required to get the “latest and greatest” features. With Nutanix, it’s different. Since all features are deployed in software, they can run on any hardware platform, any hypervisor, and be deployed through simple software upgrades.
Until next time, Rob…
Hi all…It’s been a few weeks since my last blog post. I’ve been busy with some travel to Microsoft Technology Centers and working on the Nutanix Ready Program. Yesterday, Nutanix released NOS 4.5. This exciting upgrade adds some great features.. Sit back and get ready to enjoy the ride…release notes below.
|Table 1. Terminology Updates|
|New Terminology||Formerly Known As|
|Acropolis base software||Nutanix operating system, NOS|
|Acropolis hypervisor, AHV||Nutanix KVM hypervisor|
|Acropolis API||Nutanix API and Acropolis API|
|Acropolis App Mobility Fabric||Acropolis virtualization management and administration|
|Acropolis Distributed Storage Fabric, DSF||Nutanix Distributed Filesystem (NDFS)|
|Prism Element||Web console (for cluster management); also known as the Prism web console; a cluster managed by Prism Central|
|Prism Central||Prism Central (for multicluster management)|
|Block fault tolerance||Block awareness|
What’s New in Acropolis base software 4.5
Bandwidth Limit on Schedule
- The bandwidth throttling policy provides you with an option to set the maximum limit of the network bandwidth. You can specify the policy depending on the usage of your network.
Note: You can configure bandwidth throttling only while updating the remote site. This option is not available during the configuration of remote site.
Cloud Connect for Azure
- The cloud connect feature for Azure enables you to back up and restore copies of virtual machines and files to and from an on-premise cluster and a Nutanix Controller VM located on the Microsoft Azure cloud. Once configured through the Prism web console, the remote site cluster is managed and monitored through the Data Protection dashboard like any other remote site you have created and configured. This feature is currently supported for ESXi hypervisor environments only.
Common Access Card Authentication
- You can configure two-factor authentication for web console users that have an assigned role and use a Common Access Card (CAC).
Default Container and Storage Pool Upon Cluster Creation
- When you create a cluster, the Acropolis base software automatically creates a container and storage pool for you.
- Complementary to deduplication and compression, erasure coding increases the effective or usable cluster storage capacity. [FEAT-1096]
- This is very cool tech…Check out Josh Odgers blog post for more details on EC
Hyper-V Configuration through Prism Web Console
- After creating a Nutanix Hyper-V cluster environment, you can use the Prism web console to join the hosts to the domain, create the Hyper-V failover cluster, and also enable Kerberos.
Image Service Now Available in the Prism Web Console
- The Prism web console Image Configuration workflow enables a user to upload ISO or disk images (in ESXi or Hyper-V format) to a Nutanix AHV cluster by specifying a remote repository URL or by uploading a file from a local machine.
MPIO Access to iSCSI Disks (Windows Guest VMs)
- Acropolis base software 4.5 feature to help enforce access control to volume groups and expose volume group disks as dual namespace disks.
- Network mapping allows you to control network configuration for the VMs when they are started on the remote site. This feature enables you to specify network mapping between the source cluster and the destination cluster. The remote site wizard includes an option to create one or more network mappings and allows you to select source and destination network from the drop-down list. You can also modify or remove network mappings as part of modifying the remote sites.
Nutanix Cluster Check
- Acropolis base software 4.5 includes Nutanix Cluster Check (NCC) 2.1, which includes many new checks and functionality.
- NCC 2.1 Release Notes
NX-6035C Clusters Usable as a Target for Replication
- You can use a Nutanix NX-6035C cluster as a target for Nutanix native replication and snapshots, created by source Nutanix clusters in your environment. You can configure the NX-6035C as a target for snapshots, set a longer retention policy than on the source cluster (for example), and restore snapshots to the source cluster as needed. The source cluster hypervisor environment can be AHV, Hyper-V, or ESXi. See Nutanix NX-6035C Replication Target in Notes and Cautions.
Note: You cannot use an NX-6035C cluster as a backup target with third-party backup software.
Prism Central Can Now Be Deployed on the Acropolis Hypervisor (AHV)
- Nutanix has introduced a Prism Central OVA which can be deployed on an AHV cluster by leveraging Image Service features. See the Web Console Guide for installation details.
- Prism Central 4.5 Release Notes
Prism Central Scalability
- By increasing memory capacity to 16GB and expanding its virtual disk to 260GB, Prism Central can support a maximum of 100 clusters and 10000 VMs (across all the clusters and assuming each VM has an average of two virtual disks). Please contact Nutanix support if you decide to change the configuration of the Prism Central VM.
- Prism Central 4.5 Release Notes
- Prism Central Scalability, Compatibility and Deployment
Simplified Add Node Workflow
- This release leverages Foundation 3.0 imaging capabilities and automates the manual steps previously required for expanding a cluster through the Prism web console.
- The Nutanix SNMP MIB database includes the following changes:
- The database includes tables for monitoring hypervisor instances and virtual machines.
- The service status table named serviceStatusTable is obsolete. Analogous information is available in a new table named controllerStatusTable. The new table has a smaller number of MIB fields for displaying the status of only essential services in the Acropolis base software.
- The disk status table (diskStatusTable), storage pool table (storagePoolInformationTable), and cluster information table include one or more new MIB fields.
- The SNMP feature also includes the following enhancements:
- From the web console, you can trigger test alerts that are sent to all configured SNMP trap receivers.
- SNMP service logs are now written to the following log file: /home/nutanix/data/logs/snmp_manager.out
Support for Minor Release Upgrades for ESXi Hosts
- Acropolis base software 4.5 enables you to patch upgrade ESXi hosts with minor release versions of ESXi host software through the Controller VM cluster command. Nutanix qualifies specific VMware updates and provides a related JSON metadata upgrade file for one-click upgrade, but now customers can patch hosts by using the offline bundle and md5sum checksum available from VMware, and using the Controller VM cluster command.
Note: Nutanix supports the ability to patch upgrade ESXi hosts with minor versions that are greater than or released after the Nutanix qualified version, but Nutanix might not have qualified those minor releases. Please see the the Nutanix hypervisor support statement in our Support FAQ.
VM High Availability in Acropolis
- In case of a node failure, VM High Availability (VM-HA) ensures that VMs running on the node are automatically restarted on the remaining nodes within the cluster. VM-HA can optionally be configured to reserve spare failover capacity. This capacity reservation can be distributed across the nodes in chunks known as “segments” to provide better overall resource utilization.
Windows Guest VM Failover Clustering
- Acropolis base software 4.5 supports configuring Windows guest VMs as a failover cluster. This clustering type enables applications on a failed VM to fail over to and run on another guest VM on the same or different host. This release supports this feature on Hyper-V hosts with in-guest VM iSCSI and SCSI 3 Persistent Reservation (PR).
Tech Preview Features
Note: Do not use tech preview features on production systems or storage used or data stored on production systems.
File Level Restore
- The file level restore feature allows a virtual machine user to restore a file within a virtual machine from the Nutanix protected snapshot with minimal Nutanix administrator intervention.
Note: This feature should be used only after upgrading all nodes in the cluster to Acropolis base software 4.5.
What’s New in Prism Central
Prism Central for Acropolis Hypervisor (AHV)
Nutanix has introduced a Prism Central VM which is compatible with AHV to enable multicluster management in this environment. Prism Central now supports all three major hypervisors: AHV, Hyper-V, and ESXi.
Prism Central Scalability
The Prism Central VM requires these resources to support the clusters and VMs indicated in the table.
Prism Central vCPU
|Prism Central Memory (GB, default)||Total Storage Required for Prism Central VM (GB)||Clusters Supported||VMs Supported (across all clusters)||Virtual disks per VM|
Release Notes | NCC 2.1
Learn More About NCC Health Checks
You can learn more about the Nutanix Cluster Check (NCC) health checks on the Nutanix support portal. The portal includes a series of Knowledge Base articles describing most NCC health checks run by the ncc health_checks command.
What’s New in NCC 2.1
NCC 2.1 includes support for:
- Acropolis base software 4.5 or later
- NOS 4.1.3 or later only
- All Nutanix NX Series models
- Dell XC Series of Web-scale Converged Appliances
Tech Preview Features
The following features are available as a Tech Preview in NCC 2.1.
Run NCC health checks in parallel
- You can specify the number of NCC health checks to run in parallel to reduce the amount of time it takes for all checks to complete. For example, the command ncc health_checks run_all –parallel=25 will run 25 of the health checks in parallel.
Use npyscreen to display NCC status
- You can specify npyscreen as part of the ncc command to display status to the terminal window. Specify –npyscreen=true as part of the ncc health_checks command.
New Checks in This Release
|Check Name||Description||KB Article|
|check_disks||Check whether disks are discoverable by the host. Pass if the disks are discovered.||KB 2712|
|check_pending_reboot||Check if host has pending reboots. Pass if host does not have pending reboots.||KB 2713|
|check_storage_heavy_node||Verify that nodes such as the storage-heavy NX-6025C are running a service VM and no guest VMs.
Verify that nodes such as the storage-heavy NX-6025C are runningthe Acropolis hypervisor only.
|check_utc_clock||Check if UTC clock is enabled.||KB 2711|
|cluster_version_check||Verifiy that the cluster is running a released version of NOS or the Acropolis base software. This check returns an INFO status and the version if the cluster is running a pre-release version.||KB 2720|
|compression_disabled_check||Verify if compression is enabled.||KB 2725|
|data_locality_check||Check if VMs that are part of a cluster with metro availability are in two different datastores (that is, fetching local data).||KB 2732|
|dedup_and_compression_enabled_containers_check||Checks if any container have deduplication and compression enabled together.||KB 2721|
|dimm_same_speed_check||Check that all DIMMs have the same speed.||KB 2723|
|esxi_ivybridge_performance_degradation_check||Check for the Ivy Bridge performance degradation scenario on ESXi clusters.||KB 2729|
|gpu_driver_installed_check||Check the version of the installed GPU driver.||KB 2714|
|quad_nic_driver_version_check||Check the version of the installed quad port NIC driver version.||KB 2715|
|vmknics_subnet_check||Check if any vmknics have same subnet (different subnets are not supported).||KB 2722|
Foundation Release 3.0
This release includes the following enhancements and changes:
- A major new implementation that allows for node imaging and cluster creation through the Controller VM for factory-prepared nodes on the same subnet. This process significantly reduces network complications and simplifies the workflow. (The existing workflow remains for imaging bare metal nodes.) The new implementation includes the following enhancements:
- A Java aplet that automatically discovers factory-prepared nodes on the subnet and allows you to select the first one to image.
- A simplified GUI to select and configure the nodes, define the cluster, select the hypervisor and Acropolis base software versions to use, and monitor the imaging and cluster creation process.
Customers may create a cluster using the new Controller VM-based implementation in Foundation 3.0. Imaging bare metal nodes is still restricted to Nutanix sales engineers, support engineers, and partners.
- The new implementation is incorporated in the Acropolis base software version 4.5 to allow for node imaging when adding nodes to an existing cluster through the Prism GUI.
- The cluster creation workflow does not use IPMI, and for both cluster creation and bare-metal imaging, the host operating system install is done within an “installer VM” in Phoenix.
- To see the progress of a host operating system installation, point a VNC console at the node’s Controller VM IP address on port 5901.
- Foundation no longer offers the option to run diagnostics.py as a post-imaging test. Should you wish to run this test, you can download it from the Tools & Firmware page on the Nutanix support portal.
- There is no Foundation upgrade path to the new Controller VM implementation; you must download the Java aplet from the Foundation 3.0 download page on the support portal. However, you can upgrade Foundation 2.1.x to 3.0 for the bare metal workflow as follows:
- Copy the Foundation tarball (foundation-version#.tar.gz) from the support portal to /home/nutanix in your VM.
- Navigate to /home/nutanix.
- Enter the following five commands:
- $ sudo service foundation_service stop
- $ rm -rf foundation
- $ tar xzf foundation-version#.tar.gz
- $ sudo yum install python-scp
- $ sudo service foundation_service restart
- If the first command (foundation_service stop) is skipped or the commands are not run in order, the user may get bizarre errors after upgrading. To fix this situation, enter the following two commands:
- $ sudo pkill -9 foundation
- $ sudo service foundation_service restart
Release Notes for each of these products is located at:
- Acropolis base software 4.5: https://portal.nutanix.com/#/page/docs/details?targetId=Release_Notes-Acr_v4_5:rel_Release_Notes-Acr_v4_5.html
- Prism Central 4.5: https://portal.nutanix.com/#/page/docs/details?targetId=Release_Notes-Acr_v4_5:rel_Release_Notes-Prism_Central_v4_5.html
- Nutanix Cluster Check(NCC) 2.1: https://portal.nutanix.com/#/page/docs/details?targetId=Release_Notes-NCC:rel_Release_Notes-NCC_v2_1.html
- Foundation 3.0: https://portal.nutanix.com/#/page/docs/details?targetId=Field_Installation_Guide-v3_0:fie_release_notes_foundation_v3_0_r.html
- Acropolis base software 4.5: https://portal.nutanix.com/#/page/releases/nosDetails?targetId=4.5&targetVal=EA
- Prism Central 4.5: https://portal.nutanix.com/#/page/releases/prismDetails
- Nutanix Cluster Check 2.1: https://portal.nutanix.com/#/page/static/supportTools
- Foundation 3.0: https://portal.nutanix.com/#/page/foundation/list
- Nutanix AHV Metadata(Acropolis base 4.5) AHV-20150921: http://download.nutanix.com/hypervisor/kvm/4.5/host-bundle-el6.nutanix.20150921-metadata.json
- Nutanix AHV (Acropolis base 4.5) AHV-20150921: http://download.nutanix.com/hypervisor/kvm/4.5/host-bundle-el6.nutanix.20150921.tar.gz
Until next time, Rob…
Hi Everyone…I love to show off the cool Microsoft integrations that Nutanix has and most recently Nutanix released System Center Virtual Machine Manager (SCVMM) 2012 R2 Fast Clones plug-in.
With NOS 4.1.3, Nutanix has released a Fast Clone plugin for SCVMM. The plug-in has the ability to provide space efficient, low impact clones from SCVMM and quickly. The plugin is a wrapper around Nutanix powershell commands for Fast Cones. The plugin does need proper access rights to the Hyper-V hosts and SCVMM and already should be setup for most environments that have Nutanix with Hyper-V deployed. You will need to install the plugin on the SCVMM host along with the Nutanix powershell command-lets.
Once you have the SCVMM Fast Clones plug-in installed, you can start creating Fast Clones right away. Installation is quick and easy and creating clones is just as easy as shown below.
To create VM clones using the Nutanix Fast Clones wizard, follow the below steps:
- Start the SCVMM
- Navigate to the Nutanix hosts.
- Select a host and then select the VM to be cloned.
- To invoke the wizard, do one of the following: Click the “Nutanix Fast Clone” button on the top menu-bar. Right-click the target VM and select “Nutanix Fast Clone” from the pop-up context menu:
- In the Introduction screen, read the instructions and then click the “Next” button. NOTE: On start of the wizard, it makes a connection to the VMM to be able to communicate with it to run SCVMM PowerShell cmdlets to gather information about the selected VM.
- The “Identity” screen is displayed. The “Source VM Name” and “Source VM Host Name” is prepopulated, enter the following information and then click the “Next” button:
- Clone Type: Click the “Clone One Virtual Machine” radio button and enter a name for the clone when creating a single clone or click the “Clone Multiple Virtual Machines” radio button and enter the following information:
- In the Authentication screen, enter the Prism and VMM Service Account user names and passwords in the appropriate fields, and then click the “Next” button.
- In the “Select Path” screen, select the destination path and then click the “Next” button. Leave the default path “as is” or change it to a new path as needed by clicking the “Change the default path” box. Click the Browse button to select a destination path for the clone VMs. This is the path where virtual machine configuration files will be stored. The path must be on the same Nutanix SMB share as the VM configuration file.
- In the “Add Properties” screen, click the appropriate radio button to either power on or not power on the VMs after cloning and then click the “Next” button.
- In the Summary screen below, review (confirm) the settings are correct.
Clicking the “View Script” button displays the script to be executed:
Clicking the “Enable Verbose Messages” displays detailed log messages as the VMs are being created.
- When the settings are correct, click the “Create” button to create the cloned VM(s). An hour glass is displayed and progress messages are displayed.
- After the clones are created, click the Finish button to close the wizard and you just created VM’s at lighting speed.
If you want to check out Fast Clones for your environment, you can download Fast Clones from the Nutanix Portal at https://portal.nutanix.com.
Below is a demo video shows traditional cloning vs Fast Clones that my buddy @ created. It shows the awesome benefit of Fast Clones.
As always, if you have any questions please post a comment.
Until next time….Rob
Again….at my job at Nutanix…I get to work with great partners and one of the first was ScienceLogic 🙂 .The Solutions team was great to work with and I really got a chance to see deep integration with Nutanix’s REST API and watch the their solution grow.
Below is podcast of an Interview that my awesome buddy TommyG (@NutanixTommy) and I did with Jim Weingarten (@jweingarten) from SL. Jim has a great perspective of the IT landscape and the current shift in Hybrid IT. It was great to work with Jim over the past few months and watch their solution evolve.
A little about ScienceLogic…
ScienceLogic is a software and service vendor. It produces information technology (IT) management and monitoring solutions for IT Operations and Cloud computing.
The company’s product is a monitoring and management system that performs discovery, dependency mapping, monitoring, alerting, ticketing, runbook automation, dashboarding and reporting for networks, compute, storage and applications.
The platform monitors both on-premises and cloud-based IT assets, enabling customers who use public cloud services, such as Azure and Amazon Web Services (AWS), to migrate workloads to the cloud.
Enjoy the show…..Rob